I love the idea of having a set place for charging my cell phone, and the gift shop where I work sells these. But they're plastic and minimal, and I hate to spend money on something so basic, so I decided to make my own. I got the hubs involved in it, too! I found the tutorial on here, on my new favorite blog, and went from there.
First, your supplies: 2 empty bottles, cleaned out and air-dried (it worked best to rinse them and then thoroughly clean them once they were cut open.) A blade, sand-paper, and of course, Mod Podge and a sponge brush.
(***We had 2 bottles because we were both making a holder. You obviously only need 1.***)
Now, the steps:
| 1) Decide how high you want the front of your holder to be on your cell phone. Draw a line. |
| 3) Using your blade, cut along the lines you drew. |
| 4) This is about what it should look like when you're done cutting. |
| 5) Draw a cutout area for your charger's plug. It should be just big enough for your charger to fit through. |
| 6) Cut out the hole for the plug. |
| 7) Using sandpaper, sand down all edges until smooth. Also, sand entire area of bottle so ModPodge will adhere more easily. |
| 9) Cover entire project in a thick layer of Mod Podge. |
| 10) Using scissors or your blade, cut out the fabric around the hole for your charger plug. Apply an extra layer of Mod Podge and let dry. |
| Ta-Da! You're done! |
| Enjoy your new creation... |
| It keeps your cords and phones off the floor, and even if you kept your phone or iPod on a nearby table, you still don't have to worry about the dangling cords! |
This is Awesome! I will be trying today.
ReplyDelete